Cold Fire - 2 Liter Extinguisher

Cold Fire - 2 Liter Extinguisher Kit
Cold Fire™ products are environmentally friendly fire extinguishing agents, leading the way in firefighting technology and revolutionizing the way firefighters combat fires. Cold Fire™ can be used to cool down hot surfaces rapidly for added safety and increased productivity. Cold Fire™ products can be used in various ways.

NOTE: Code 3 offers the All Season Blend. ASB is formulated to be used in all weather conditions. The Regular Blend however is not and may not work smoothly in colder temperatures.

Cold Fire Applications:

Various types of wildfires; grass/scrub, brush, heavy timber and related applications.
Sawdust and slash fires.
Fire lines creation in wildfires.
Structure fires.
Structure protection from wildfires.
Cool-down of embers on firefighters and other protective applications.
Additional protection in controlled burns.
High oil content foliage, such as palmetto and cedar.
Tire fires.
Vehicle fires.
Paints and oil-based fires.
Auto fuel fires.
Fuel storage tanks close to fires. (keeping them cool)
Prevention of hot spot and fires from hot torch roofing applications.
Cool-down of equipment.
Protection of hazardous or explosive material from oncoming fires.
Creation of a heat barrier to help prevent heat damage and hidden fires.
Closed loop systems such as sprinkler systems and on-board extinguishing systems.

Cold Fire - Cooling Capabilities:
Cold Fire has an amazing ability to cool metal down 21 times faster than water, without 'shocking' or damaging the metal. In a cooling comparison test each sample of material was heated to 500° using a hand torch, then sprayed with Cold Fire and water. The third element tested was ambient air.

Cold Fire Special Attributes:
After Cold Fire™ is applied to a structure it remains wet for forty-five minutes. There is field experience indicating that once dry there may be extended protection. Gels can dry in a few hours and become ineffective unless re-hydrated.

Cold Fire™ can be used with fresh or salt water.
Unlike gels that form a very slippery film on horizontal platforms, steps, etc., and can be tracked into a residence, Cold Fire™ is essentially unnoticeable.
Unlike some products Cold Fire™ will not damage structural paint surfaces or roofing materials, is not an eye or skin irritant, and will not clog valves, or diminish the range of the hose-nozzle spray pattern.
Cold Fire™ has been tested successfully under the purview of MTDC (Missoula, Montana) for surface and inter-granular corrosion of aluminum. This feature is important when using this product for aerial applications.
Cold Fire™ can provide the necessary adjustment of fire movement and control burn patterns to support controlled burn policies.
Cold Fire™ will not influence the investigation scene of suspected arson. Unlike other fire fighting materials which may mask the evidence, it has been noted that the olfactory faculties of animals normally used in the investigation are not affected by the use of Cold Fire.
Cold Fire™ can be used not only for structure protection but as the primary fire-fighting agent. In addition, this single product provides the capability to handle class A, B and D fires.
Cold Fire™ can be stored indefinitely. It has passed the freeze/thaw cycle test without detriment to product performance. Many other products separate or otherwise lose effectiveness and must be stored in protective environments to prevent a freeze situation or excessive heat and/or moisture exposure.