US Armor Enforcer XP, Level II
Product Code: USA-F-500403-RS-F-500301-SS-019
Availability:In stock
Size chart
Sizing Charts
Choose from one of our available sizing charts below.
US Armor Sizing
Revision
Elbeco Sizing Chart
Safariland "Will Fit" Code Charts
- Magazine Holders (AMT — Walther)
- Speedloaders (Charter — Taurus)
- Duty Holsters for Pistols (AMT — Wilson)
- Pistols: Tactical
- Pistols: Concealment
- Duty Holsters for Revolvers (Colt — Taurus)
- Revolvers: Concealment
- Pistols w/Lights (AMT — Walther)
Danner - Tips for Sizing
- Measure both feet. If one foot is slightly larger than the other, select a size that fits the larger of the two.
- Consider the type of socks you’ll be wearing with your boot. For thicker socks, you may want to select a half size larger than you normally wear.
- When you do receive your boots, we recommend first wearing them indoors for a few hours to ensure they’re the right fit.
TURTLESKIN GLOVE SIZING
To make sure you get the best comfort, protection, and satisfaction, TurtleSkin Glove sizes are based on accurate hand measurements.
TurtleSkin Gloves come in many sizes to best fit you. Please use these charts to find your best glove size.
NOTE: Use the longest "finger length" or "hand width" measurement to find your size. If your longest measurement falls between sizes, order the larger size.
Hand Width Measurement: Wrap a tailor's measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.

Sizes | |
6-7 inches | XS |
7-8 inches | S |
8-9 inches | M |
9-10 inches | L |
10-11 inches | XL |
11 plus inches | XXL |
Sizes | |
6 5/16 inches | XS |
6 3/4 inches | S |
7 3/16 inches | M |
7 9/16 inches | L |
8 1/16 inches | XL |
8 7/16 plus inches | XXL |

If you have any questions about measuring your hand, please call us at 888-884-2427 (Mon-Fri 9am to 5pm, EST)
Please note: there is currently a 14 to 18 week lead time on all US Armor products.
Enforcer XP - Level II
In response to the new NIJ .06 standard, U.S. Armor has developed the Enforcer XP made with 100% Kevlar® XP™. The Enforcer XP has been designed specifically for today's modern threats. One of the key features of this vest is its ability to reduce the back face deformation of projectile impacts by 15% when compared to other ballistic models.
Standard Features:
- NIJ .06 Certified
- Shirt Tails
- 6" x 8" Soft Ballistic Trauma Plate
- Removable strap system
- 6-point elastic/VELCRO® closure system
- Breath-O-Prene® ventilated shoulder strap system for enhanced weight distribution
- Easy VELCRO® ballistic panel access
- Wikaway moisture management systems on both inner sections of carrier
Aerial Density
- 0.85 lbs/sq/ft (13.6 oz./sq. ft.) - Male IIIA
- Thickness: 0.22 In
Ballistic Capabilities
- 9mm (124 gr FMJ RN) - 1604 fps / 488.19 mps
- .357 Magnum (158 gr JSP) - 1630 fps / 496.82 mps
Optional Features (Not Included)
- Uniform Shirt Carrier
- CoolMax® T-shirts
- Concealable Carry Bags (Nylon)
- Winter Quilt outer carrier
- Ranger 100, 200, 300, 500 outer carriers
- Additional trauma plate inserts
Warranty:
- Removable Carriers: 18 months
- US Armor Fit Guarantee: 60 days
The Enforcer XP is a ballistic panel only, shown here with the Poly Cotton Carrier.
US Armor Standard Sizing for Vests |
Front Panel |
Back Panel |
Small Regular | 18x12.5 | 14.5x14.5 |
Small Long | 18x13.5 | 14.5x15.5 |
Medium Regular | 19x13 | 17.5x15.5 |
Medium Long | 19x14 | 17.5x16.5 |
Large Regular | 19.5x14 | 19.5x16 |
Large Long | 19.5x15 | 19.5x17 |
X-Large Regular | 20x14 | 22x16 |
X-Large Long | 20x15 | 22x17 |
2X-Large Regular | 21x14.5 | 25x16.5 |
2X-Large Long | 21x15.5 | 25x17.5 |
3X-Large Regular | 22x15 | 27.5x17.5 |
3X-Large Long | 22x16 | 27.5x18.5 |