Shellback Tactical Banshee Rifle Plate Carrier
Product Code: SBT-BANRIF-MC
Availability:In stock
Size chart
Sizing Charts
Choose from one of our available sizing charts below.
US Armor Sizing
Revision
Elbeco Sizing Chart
Safariland "Will Fit" Code Charts
- Magazine Holders (AMT — Walther)
- Speedloaders (Charter — Taurus)
- Duty Holsters for Pistols (AMT — Wilson)
- Pistols: Tactical
- Pistols: Concealment
- Duty Holsters for Revolvers (Colt — Taurus)
- Revolvers: Concealment
- Pistols w/Lights (AMT — Walther)
Danner - Tips for Sizing
- Measure both feet. If one foot is slightly larger than the other, select a size that fits the larger of the two.
- Consider the type of socks you’ll be wearing with your boot. For thicker socks, you may want to select a half size larger than you normally wear.
- When you do receive your boots, we recommend first wearing them indoors for a few hours to ensure they’re the right fit.
TURTLESKIN GLOVE SIZING
To make sure you get the best comfort, protection, and satisfaction, TurtleSkin Glove sizes are based on accurate hand measurements.
TurtleSkin Gloves come in many sizes to best fit you. Please use these charts to find your best glove size.
NOTE: Use the longest "finger length" or "hand width" measurement to find your size. If your longest measurement falls between sizes, order the larger size.
Hand Width Measurement: Wrap a tailor's measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.

Sizes | |
6-7 inches | XS |
7-8 inches | S |
8-9 inches | M |
9-10 inches | L |
10-11 inches | XL |
11 plus inches | XXL |
Sizes | |
6 5/16 inches | XS |
6 3/4 inches | S |
7 3/16 inches | M |
7 9/16 inches | L |
8 1/16 inches | XL |
8 7/16 plus inches | XXL |

If you have any questions about measuring your hand, please call us at 888-884-2427 (Mon-Fri 9am to 5pm, EST)
Shellback Tactical Banshee Rifle Plate Carrier
The Banshee Rifle Plate Carrier was designed to meet and exceed the needs of law enforcement, military, and tactical operators. This ultra lightweight, low profile, high quality plate carrier has great load carrying capacity.
Ideal gear for law enforcement patrol officers for use in high threat active shooter situations, multi-assault counter terrorism action capabilities (MACTAC) and counter terrorism direct actions.
The Banshee Rifle Plate Carrier is approved for wear by the Los Angeles Police Department (LAPD).
The shoulders on the carrier are fully adjustable and padded for comfort. The shoulder areas once adjusted slides into itself and locks in securely with a hidden quick release buckle. The shoulders have two rows of PALS webbing with elastic nylon sewn in between the PALS webbing allowing for comms or hydration tubing.
The Banshee Rifle Plate Carrier comes standard with a removable cummerbund. Cummerbund runs through the carrier, is fully adjustable (one size fits most) and has PALS webbing on the interior and exterior to accept side plates or other pouches. Also standard is a secondary nylon strap system with quick release buckles (also removable) if the cummerbund is not needed.
Features:
- Constructed of durable 500 Denier Nylon
- Holds 10 x 12 shooter or SAPI cut ballistic plates
- Removable cummerbund with interior and exterior PALS for side plates
- Cummerbund accepts 13.75" x 5.5" soft armor inserts
- Quick release secondary securing system
- Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest.
- Fully adjustable and padded front, back and shoulder areas.
- Two areas of loop on front and rear for id placards
- Front pocket accepts kangaroo inserts
- Heavy Duty bar tacking at key stress points
- Wire, antenna or hydration hose guides
- Low profile design for mobility
- Rear drag handle
- Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED
- Lifetime warranty
- GSA and TAA Compliant