Measure both feet. If one foot is slightly larger than the other, select a size that fits the larger of the two.
Consider the type of socks you’ll be wearing with your boot. For thicker socks, you may want to select a half size larger than you normally wear.
When you do receive your boots, we recommend first wearing them indoors for a few hours to ensure they’re the right fit.
TURTLESKIN GLOVE SIZING
To make sure you get the best comfort, protection, and satisfaction, TurtleSkin Glove sizes are based on accurate hand measurements. TurtleSkin Gloves come in many sizes to best fit you. Please use these charts to find your best glove size. NOTE:Use the longest "finger length" or "hand width" measurement to find your size. If your longest measurement falls between sizes, order the larger size.
Hand Width Measurement:Wrap a tailor's measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.
Sizes
6-7 inches
XS
7-8 inches
S
8-9 inches
M
9-10 inches
L
10-11 inches
XL
11 plus inches
XXL
Finger Length Measurement: Measure from the bottom edge of your palm to the tip of your middle finger to determine your "finger length" size.
Sizes
6 5/16 inches
XS
6 3/4 inches
S
7 3/16 inches
M
7 9/16 inches
L
8 1/16 inches
XL
8 7/16 plus inches
XXL
If you have any questions about measuring your hand, please call us at 603-291-1000 (Mon-Fri 9am to 5pm, EST)
Engineered specifically for EMS professionals, the Responder Parka gives you the utility, performance, and reliability to respond effectively. The waterproof, breathable construction keeps out wind and weather without heating you up during periods of high activity, and a blood-borne pathogen resistant* lining keeps you protected from environmental hazards. A three-way adjustable hood, hook and loop storm cuffs, a double storm flap, and an elastic corded hem keep out rain and cold, while a water resistant radio pocket and shoulder mounted mic loops keep you connected. Abrasion panels at the shoulders provide traction for a backpack or duty bag, a patch panel at the right chest secures your ID, and zippered pockets at the chest and sleeves are sized for EMS accessories. Reflective tape has been installed at the hem and sleeves to provide an enhanced visibility profile for night time or low light conditions.
Features:
Waterproof, breathable, functional
Blood-borne pathogen resistant* lining
Zippered utility pockets at the sleeves
Front flap pockets
Zippered storage pockets at left chest
Water resistant radio pocket
Mic loops at each shoulder
ID panel at right chest
Three-way adjustable hood
Abrasion panels at shoulders
High performance, waterproof 10,000mm fabric
Reflective tape at sleeves and hem
Hook and loop storm cuffs
Double storm flap
Elastic corded hem
YKK̴å¬ zipper hardware
Prym̴å¬ snaps
*Blood-Borne Pathogen Resistance Disclaimer: If indicated, an independent laboratory has tested this product and has found that the materials and seams provide passing results when tested in accordance with ASTM F 1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens. It is important to note, however, that, even though garment materials and seams may satisfy the standards of ASTM F 1671, it might not provide an adequate barrier to viruses in all conditions and our products will not protect the wearer from all blood-borne pathogens and viruses under all conditions. All end users will need to assess the specific hazards in their workplace in order to determine the appropriate types and levels of personal protective clothing and equipment that they might need. To maintain proper performance, 5.11 products must be maintained in accordance with the care instructions on the product label. Please visit the ASTM International Standards website for further information regarding ASTM F 1671. www.astm.org
