Measure both feet. If one foot is slightly larger than the other, select a size that fits the larger of the two.
Consider the type of socks you’ll be wearing with your boot. For thicker socks, you may want to select a half size larger than you normally wear.
When you do receive your boots, we recommend first wearing them indoors for a few hours to ensure they’re the right fit.
TURTLESKIN GLOVE SIZING
To make sure you get the best comfort, protection, and satisfaction, TurtleSkin Glove sizes are based on accurate hand measurements. TurtleSkin Gloves come in many sizes to best fit you. Please use these charts to find your best glove size. NOTE:Use the longest "finger length" or "hand width" measurement to find your size. If your longest measurement falls between sizes, order the larger size.
Hand Width Measurement:Wrap a tailor's measuring tape around your dominant hand just below knuckles, excluding your thumb, and make a fist. This measurement is your "hand width" glove size.
Sizes
6-7 inches
XS
7-8 inches
S
8-9 inches
M
9-10 inches
L
10-11 inches
XL
11 plus inches
XXL
Finger Length Measurement: Measure from the bottom edge of your palm to the tip of your middle finger to determine your "finger length" size.
Sizes
6 5/16 inches
XS
6 3/4 inches
S
7 3/16 inches
M
7 9/16 inches
L
8 1/16 inches
XL
8 7/16 plus inches
XXL
If you have any questions about measuring your hand, please call us at 603-291-1000 (Mon-Fri 9am to 5pm, EST)
With a zip-out quilted liner, a roll-up/removable hood, and waterproof/breathable construction, the Signature Duty Jacket provides complete and modular weather protection ideally suited to a broad range of patrol climates. The wind and water repellent nylon shell keeps you dry and comfortable while the zip-out blood-borne pathogen resistant* quilted liner provides superior on the job protection. Underarm zippers offer increased ventilation when the weather warms up, and zippers at the side seams provide unrestricted access to your sidearm. A bi-swing back ensures full range of motion, a pull out ID panel at the back supports a law enforcement identification patch, and Backup Belt System‰̣ۡå¢ front storage pockets allow you to customize your accessories as you see fit.
Features:
Adaptable weather protection
Zip-out quilted liner
Blood-borne pathogen resistant* liner
5.11 Hidden Document Pockets
Backup Belt System front pockets
Zipping side seams
Hidden handwarmer pockets
Badge tab kit included
Underarm zippers for ventilation
High performance nylon shell
Breathable polyester liner
Bi-swing back
Ike length
Elasticized hem
Rear ID panel
Zip-through collar
Hook and loop storm cuffs
*Blood-Borne Pathogen Resistance Disclaimer: If indicated, an independent laboratory has tested this product and has found that the materials and seams provide passing results when tested in accordance with ASTM F 1671, Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens. It is important to note, however, that, even though garment materials and seams may satisfy the standards of ASTM F 1671, it might not provide an adequate barrier to viruses in all conditions and our products will not protect the wearer from all blood-borne pathogens and viruses under all conditions. All end users will need to assess the specific hazards in their workplace in order to determine the appropriate types and levels of personal protective clothing and equipment that they might need. To maintain proper performance, 5.11 products must be maintained in accordance with the care instructions on the product label. Please visit the ASTM International Standards website for further information regarding ASTM F 1671. www.astm.org
